Testing DHCP on Tagged VLANs Using a Raspberry Pi Test Client
A trunk port may appear correct yet still give a DHCP lease from the wrong VLAN, so testing is needed. The article recommends using a Raspberry Pi as a wired test client left on the switch port, instead of re-cabling a laptop. It uses PathProbe, a command-line DHCP and VLAN tester, running on Raspberry Pi OS, to first check an untagged client and then a client sending an 802.1Q tag for VLAN 100. Failure of the tagged test while the untagged one succeeds points to a problem in the port, trunk, or DHCP helper configuration. The author stresses testing only on networks one owns or is authorized to test, and avoiding publication of identifying details from captures.
This is an AI-generated summary. ShortSingh links to the original source for the complete article.
Discussion (0)
Log in to join the discussion and vote.
Log in