Guide Explains Building a First PCB Online: Design Tools Versus Fabrication

The article distinguishes two separate steps in creating a first printed circuit board: designing it with a PCB builder and manufacturing it through a board house. A PCB builder handles the schematic, footprints, placement, routing, and design-rule checks, while a PCB maker such as JLCPCB or PCBWay produces the physical board from Gerber, drill, and BOM files. The author, who works on the browser-based PCBEditor, walks through a sample LiPo charger board with USB-C input, a 500 mA charger IC, and a 3.3 V regulator output. The design was generated on 17 October 2026 with 14 parts on a 32.5 × 34.5 mm two-layer board and zero design-rule errors. A human reviewer still caught one issue: the regulator's worst-case power dissipation was overstated at 1 W when the battery-powered supply makes it roughly 0.54 W.
This is an AI-generated summary. ShortSingh links to the original source for the complete article.
Discussion (0)
Log in to join the discussion and vote.
Log in